Switches · Compact

Long-Range Switch 8 PoE

USW-LR-Switch-8-PoE€225 excl. VAT

Long-Range Switch 8 PoE in a bright setting (illustration)
Illustration, created from Ubiquiti’s product images.

Long-Range Switch 8 PoE is a Layer 2 switch that powers cameras and access points with PoE over long cable runs, with a touchscreen on the front.

Who it suits

Suits properties where the equipment sits far from the nearest network cabinet, for example cameras at a gate or a car park, access points across a warehouse yard or a farm, and devices in outbuildings or other buildings on the site. Power and data share one cable, so each location needs only a single run from the switch. The switch sits on a shelf or in a 19-inch rack, and since it has a fan it belongs in a technical room or network cabinet. As a Layer 2 switch it handles traffic within the network, so internet, routing and the firewall come from a UniFi gateway that also manages the switch.

At a glance

Long-Range Switch 8 PoE
Number of ports
10
PoE ports
8
PoE budget
630 W
Function level
Basic
Mounting
Desktop, Rack

Good to know

  • The reach of up to 800 m needs an Outdoor Long-Range Endpoint (sold separately) at the far end of each long run. Ubiquiti's figures for the long distances apply to its UniFi Outdoor Cable.
  • The eight PoE+++ ports run at up to 100 Mbps, not gigabit. At the far end, the Long-Range Endpoint passes on at most PoE++, and the power that reaches the device depends on the cable length: Ubiquiti gives a maximum distance per device type based on its power draw.
  • The 1 GbE RJ45 and 1G SFP uplinks are one combo port: only one of them can be used at a time.

Price from Ubiquiti’s EU store, 2026-11-07

In the box

  • Long-Range Switch 8 PoE
  • Power cable
  • 2 × Rack ears
  • Cage nuts
  • Rubber feet
Image from Ubiquiti’s EU store. The plug on the power cable may look different in the picture than in the European box.

Specifications

Specifications: Long-Range Switch 8 PoE
Overview
Price (excl. VAT)€225
Function levelBasic
Ports and PoE
Ports8 × 100 Mbps RJ45 (PoE+++)
1 × 1 Gbps RJ45
1 × 1 Gbps SFP
Number of ports10
PoE ports8
Strongest PoEPoE+++
PoE budget630 W
Performance
Switching capacity3.6 Gbps
Forwarding rate2.67 Mpps
VLANs256
MAC table8,192
Features
Layer 3 routingNo
STP and RSTPYes
Loop protectionNo
IGMP snoopingNo
802.1XNo
IP-based ACLsNo
DHCP snoopingNo
Link aggregation (LACP)No
StackingNo
MC-LAGNo
Pro AV profilesNo
EtherlightingNo
Power and redundancy
Power supplyPower cord (C13)
Redundant power–
Hot-swappable power supplies–
Max power draw11 W (excl. PoE)
Hardware
Display1.3" touchscreen
CoolingFan
Physical
MountingDesktop, Rack
Dimensions210 × 260 × 43.7 mm
Weight2.6 kg
Operating temperature-5 to 45 °C

Prices in euros excluding VAT from Ubiquiti’s EU store, fetched 2026-11-07. The store may add a temporary surcharge for memory costs of about 10%.

“Not specified” means that neither Ubiquiti nor the sources we use state the value. “–” means it does not apply to the product.

Sources

Specifications come from Ubiquiti: the technical datasheets, the EU store and ui.com. The price comes from the EU store.

Show all sources (4)

Details such as chipset, RAM type and cooling come from these sources:

Ubiquiti

Compare with other Switches

Showing 16 of 52 products34 of 34 featuresSwipe sideways to see more models.

Comparison of UniFi switches
FeatureLong-Range Switch 8 PoECompactSwitch Flex MiniCompactSwitch Flex Mini 2.5GCompactSwitch FlexCompactSwitch UltraCompactSwitch Lite 8 PoECompactSwitch Flex 2.5GCompactSwitch Flex 2.5G PoECompactSwitch Lite 16 PoECompactSwitch Industrial DIN 8CompactSwitch Pro 8 PoECompactSwitch Flex XGCompactSwitch Industrial DIN 8 PoECompactSwitch Enterprise 8 PoE (Vintage)CompactSwitch Pro XG 8 PoECompactSwitch Industrial DIN 2.5G 8 PoECompact
Overview
Price (excl. VAT)€225€26
3-pack: €75
5-pack: €125
€45€89
3-pack: €255
Without adapter: €90
With 60 W adapter: €129
With 210 W adapter: €185
€99€145€179€179€250€269€270€295€430€449Not specified
Function levelBasicBasicLoop protectionBasicLoop protectionFully managedLoop protectionLoop protectionFully managedFully managedLayer 3Fully managedFully managedLayer 3Layer 3Not specified
Ports and PoE
Ports8 × 100 Mbps RJ45 (PoE+++)
1 × 1 Gbps RJ45
1 × 1 Gbps SFP
5 × 1 Gbps RJ455 × 2.5 Gbps RJ454 × 1 Gbps RJ45 (PoE+)
1 × 1 Gbps RJ45 (PoE++ input)
7 × 1 Gbps RJ45 (PoE+)
1 × 1 Gbps RJ45 (PoE++ input)
4 × 1 Gbps RJ45 (PoE+)
4 × 1 Gbps RJ45
8 × 2.5 Gbps RJ45
1 × 10 Gbps RJ45 (combo port)
1 × 10 Gbps SFP+ (combo port)
8 × 2.5 Gbps RJ45 (PoE++)
1 × 10 Gbps RJ45 (PoE+++ input, combo port)
1 × 10 Gbps SFP+ (combo port)
8 × 1 Gbps RJ45 (PoE+)
8 × 1 Gbps RJ45
8 × 1 Gbps RJ45
2 × 1 Gbps SFP
6 × 1 Gbps RJ45 (PoE+)
2 × 1 Gbps RJ45 (PoE++)
2 × 10 Gbps SFP+
1 × 1 Gbps RJ45
4 × 10 Gbps RJ45
8 × 1 Gbps RJ45 (PoE++)
2 × 1 Gbps SFP
8 × 2.5 Gbps RJ45 (PoE+)
2 × 10 Gbps SFP+
8 × 10 Gbps RJ45 (PoE++)
2 × 10 Gbps SFP+
Not specified
Number of ports1055588991610105101010Not specified
PoE ports8––474–88–8–888Not specified
Strongest PoEPoE+++––PoE+PoE+PoE+–PoE++PoE+–PoE++–PoE++PoE+PoE++Not specified
PoE budget630 W––46 W202 W52 W–196 W45 W–120 W–480 W120 W155 WNot specified
Performance
Switching capacity3.6 Gbps10 Gbps25 Gbps10 Gbps16 Gbps16 Gbps60 Gbps60 Gbps32 Gbps20 Gbps56 Gbps82 Gbps20 Gbps80 Gbps200 GbpsNot specified
Forwarding rate2.67 Mpps7 Mpps19 Mpps7 Mpps12 Mpps12 Mpps45 Mpps45 Mpps24 Mpps14.88 Mpps42 Mpps61 Mpps14.88 Mpps60 Mpps149 MppsNot specified
VLANs2561,0002561,0002561,0002562561,0001,0001,0001,0001,0001,0001,000Not specified
MAC table8,1922,0004,0002,0004,0008,0004,0004,0008,0008,00016,00016,0008,00016,00032,000Not specified
Features
Layer 3 routingNoNoNoNoNoNoNoNoNoNoYesNoNoYesYesNot specified
STP and RSTPYesNoYesNoYesYesYesYesYesYesYesYesYesYesYesNot specified
Loop protectionNoNoYesNoYesYesYesYesYesYesYesYesYesYesYesNot specified
IGMP snoopingNoNoNoNoNoYesNoNoYesYesYesYesYesYesYesNot specified
802.1XNoNoNoNoNoYesNoNoYesYesYesYesYesYesYesNot specified
IP-based ACLsNoNoNoNoNoYesNoNoYesYesYesYesYesYesYesNot specified
DHCP snoopingNoNoNoNoNoYesNoNoYesYesYesYesYesYesYesNot specified
Link aggregation (LACP)NoNoNoNoNoYesNoNoYesYesYesYesYesYesYesNot specified
StackingNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNot specified
MC-LAGNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNot specified
Pro AV profilesNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesNot specified
EtherlightingNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesNot specified
Power and redundancy
Power supplyPower cord (C13)USB-C (adapter included)
PoE in (PoE)
USB-C (adapter included)
PoE in (PoE)
PoE in (PoE++)Power adapter (adapter sold separately)
PoE in (PoE++)
Power adapter (adapter included)USB-C (adapter included)
PoE in (PoE+)
Power adapter (adapter sold separately)
PoE in (PoE+++)
Power cord (C13)DC terminal blockPower cord (C13)USB-C (adapter included)
PoE in (PoE+)
DC terminal blockPower cord (C13)Power adapter (adapter included)Not specified
Redundant power–––––––––Two built-in power inputs––Two built-in power inputs––Not specified
Hot-swappable power supplies–––––––––––––––Not specified
Max power draw11 W (excl. PoE)2.5 W5 W5 W (excl. PoE)9 W (excl. PoE)8 W (excl. PoE)14 W14 W (excl. PoE)15 W (excl. PoE)12 W30 W (excl. PoE)25 W12 W (excl. PoE)30 W (excl. PoE)61 W (excl. PoE)Not specified
Hardware
Display1.3" touchscreen–––––––––1.3" touchscreen––1.3" touchscreen–Not specified
CoolingFanFanlessFanlessFanlessFanlessFanlessFanlessFanlessFanlessFanlessFan* (From a community source)FanlessFanlessFan* (From a community source)Fan* (From a community source)Fanless
Physical
MountingDesktop, RackDesktopDesktopDesktop, Wall, PoleDesktop, Wall, MagneticDesktop, WallDesktop, Wall, DIN rail, MagneticDesktop, Wall, DIN rail, MagneticDesktop, WallWall, DIN railDesktop, WallDesktop, WallWall, DIN railDesktopDesktop, WallNot specified
Dimensions210 × 260 × 43.7 mm107 × 70 × 21 mm117.1 × 90 × 21.2 mm122.5 × 107.1 × 28 mm203 × 76 × 33 mm99.6 × 163.7 × 31.7 mm212.9 × 76 × 33.5 mm212.9 × 99.4 × 33.5 mm192 × 185 × 44 mm139 × 100 × 52 mm200 × 248 × 44 mm135 × 185 × 32 mm139 × 100 × 52 mm200 × 248 × 44 mm210.4 × 173.8 × 43.7 mmNot specified
Weight2.6 kg150 g206 g230 g320 g295 g395 g567 g1.2 kg870 g2.1 kg1.2 kg910 g2.4 kg1.6 kgNot specified
Operating temperature-5 to 45 °C-5 to 45 °C-20 to 45 °C-40 to 55 °C-30 to 60 °C-15 to 40 °C-20 to 45 °C-20 to 45 °C-15 to 40 °C-30 to 70 °C-5 to 45 °C-5 to 45 °C-30 to 70 °C-5 to 45 °C-5 to 45 °CNot specified
Good to know
NotesThe reach of up to 800 m needs an Outdoor Long-Range Endpoint (sold separately) at the far end of each long run. Ubiquiti's figures for the long distances apply to its UniFi Outdoor Cable.
The eight PoE+++ ports run at up to 100 Mbps, not gigabit. At the far end, the Long-Range Endpoint passes on at most PoE++, and the power that reaches the device depends on the cable length: Ubiquiti gives a maximum distance per device type based on its power draw.
The 1 GbE RJ45 and 1G SFP uplinks are one combo port: only one of them can be used at a time.
The USB-C power adapter comes only with the single pack, not with the 3- and 5-packs.
Can be powered through a PoE input (802.3af/at) but has no PoE output.
Can be powered through a PoE input or the included USB-C adapter but has no PoE output.Made for both indoor and outdoor use; the USW-Flex-Utility enclosure (sold separately) is for exposed outdoor locations.
Pole mounting requires the USW-Flex-Utility accessory.
A PoE input is enough to run the switch, but PoE output needs a PoE+/PoE++ input or an AC adapter.
Ubiquiti's PoE budgets apply at 45 °C; at 60 °C the figure is reduced to 161 W (230 V).
The 52 W PoE budget is shared across the four PoE+ ports (up to 30 W per port), so not every port can deliver full power at once. The budget applies with the included 60 W power adapter.The 10 GbE RJ45 and 10G SFP+ ports are one combo uplink: only one of them can be used at a time.
DIN rail and magnetic mounting need accessories sold separately.
Ubiquiti lists outdoor installation when the switch is paired with a Flex Utility enclosure, sold separately.
The 10 GbE RJ45 and 10G SFP+ ports are one combo uplink: only one of them can be used at a time.
DIN rail and magnetic mounting need accessories sold separately.
Ubiquiti lists outdoor installation when the switch is paired with a Flex Utility enclosure, sold separately.
The 45 W PoE budget is shared across the eight PoE+ ports (up to 32 W per port), so not every port can deliver full power at once.A power supply is not included. The switch runs on 12–60 V DC through a terminal block and has two DC inputs for redundant power.
Has a dry contact relay output for connecting external alarms and automation.
The 120 W PoE budget is shared across the eight PoE ports (six PoE+ and two PoE++), so not every port can deliver full power at once.Can be powered through a PoE+ input or the included 25 W USB-C adapter but has no PoE output.
Ubiquiti's datasheet says the switch must not be physically stacked.
A power supply is not included. PoE+/PoE++ output needs 50–57 V DC at the input, and the PoE budget of up to 480 W depends on the supply you connect.
Has a dry contact relay output for connecting external alarms and automation.
Ubiquiti classes this model as Vintage: it is no longer manufactured or actively developed but may still be available to buy. It continues to receive critical bug fixes and security updates.
The 120 W PoE budget is shared across the eight PoE+ ports (up to 32 W per port), so not every port can deliver full power at once.
Ubiquiti says the switch is not compatible with U7 and E7 access points that need PoE++.
The 155 W PoE budget is shared across the eight PoE++ ports (up to 60 W per port), so not every port can deliver full power at once.
The RJ45 ports run at 10 Gbps and also support 5G, 2.5G, 1G and 100M.
Has a dry contact relay output for connecting external alarms and automation.
A power supply is not included. Ubiquiti recommends a 44–57 V DC supply of at least 265 W for full PoE++ output (up to 240 W of PoE).

* From a community source, such as McCann Tech’s comparisons, not from Ubiquiti.

Prices in euros excluding VAT from Ubiquiti’s EU store, fetched 2026-11-07. The store may add a temporary surcharge for memory costs of about 10%.

“Not specified” means that neither Ubiquiti nor the sources we use state the value. “–” means it does not apply to the product.

Read more